Intended use The terminal membrane filters are specially designed to protect consumers from all waterborne pathogens. This is achieved through validated sterile filtration, which leaves the chemical composition of the water unchanged. It is used to prevent nosocomial infections caused by waterborne germs such as Legionella pneumophila, Pseudomona, Staphylococcus aureus, Klebsiella or other pathogens that are common in facilities such as hospitals, nursing homes, sports facilities, residential facilities and low or high risk day care centres. Properties The housing of the terminal sterile filter, which has been treated, inhibits the development of bacteria and the risk of retrograde contamination, whether through splashing water or direct contact. The flow rate remains constant and at a high level over a period of 92 days. Installation is quick and easy using a quick-release fastener or thread. The H2Ower 4500 has a standard thread (1/2"), allowing it to be fitted directly to the shower hose without additional accessories. Which adapter do I need for my tap? Suitable adapters for the common M22 and M24 connection sizes are available for installing our terminal water filters on a tap. The adapter required depends on the existing thread at the outlet of your tap. M22 female thread (IG) If your tap has an M22 male thread at the outlet, you will need the M22 IG adapter (female thread). The adapter is screwed onto the existing male thread of the tap. M24 male thread (AG) If your tap has an M24 female thread at the outlet, you will need the M24 AG adapter (male thread). The adapter is screwed into the existing female thread of the tap. Simple guide Male thread on the tap → Adapter with female thread (M22 IG) Female thread on the tap → Adapter with male thread (M24 AG) Please check the existing thread on your tap before ordering. In most cases, the existing aerator can be unscrewed to check the connection. Note for showers: No M22 or M24 adapter is required for showers. The H2Ower 4500 has a standard thread (1/2") and can be connected directly to the shower hose. Frequently asked questions What are terminal water filters used for? They filter out a large proportion of germs and particles from the water and can be used in emergencies, for example, in the event of a pipe network contaminated with bacteria. This ensures that consumers (taps, showers) can continue to be supplied with water. The filter serves as a preventive hygiene measure against waterborne pathogens such as Legionella pneumophila, Pseudomonas, staphylococci and Klebsiella. How often do the filters need to be replaced? The filters must be replaced after 92 days at the latest. Otherwise, there is a risk of contamination or the filter becoming clogged and losing performance. What connection options are available for the filters? Adapters are available for the filters for the common sanitary connection sizes M22 and M24. The adapters are also available in the same shop area as the filters. There is also a filter that can be used as a replacement for an existing shower head. Shower heads in particular pose a considerable health risk due to the turbulence caused by air in connection with Legionella bacteria. In which buildings are the filters used? The filters can be used in many different buildings. They can be used in private single-family or multi-family homes as well as in public buildings such as hospitals, retirement homes or larger office buildings. Frequently Asked Questions How do I find out what thread my tap has? Unscrew the aerator. You will then be able to see whether the thread is on the inside or the outside. Which adapter fits an M22 external thread? For an M22 external thread, you need the M22 IG adapter with an internal thread. Which adapter do I need for an M24 internal thread? For an M24 internal thread, the M24 external thread adapter is suitable. Do I need to unscrew the aerator before fitting? Yes, the aerator is usually removed before fitting the appropriate adapter.

H2Otap4000 – Antibacterial End-of-Point Water Filter for Faucets Sterile filtration directly at the faucet The H2Otap4000 is an antibacterial end-of-point filter for faucets that provides protection against microbial contaminants without altering the chemical composition of the water. Validated sterile filtration reliably captures potential waterborne pathogens – including Legionella, Pseudomonas, Staphylococcus aureus, and Klebsiella. It is particularly suitable for hospitals, nursing homes, sports facilities, residential buildings, and daycare centers. The flow rate remains consistently high for up to 92 days. The filter housing inhibits bacterial growth and reduces the risk of retrograde contamination. Easy Installation and Immediate Effect Installation is done directly at the faucet using a quick-connect or threaded fitting and requires no tools. The filter is effective immediately after installation, providing consistently filtered water without altering water pressure or taste. End-of-Point Filters for Sterile Filtration at the Faucet The H2Otap4000 is an antibacterial, end-of-point water filter for faucets that reliably protects against microbial contaminants without changing the chemical composition of the water. Validated sterile filtration effectively retains waterborne pathogens such as Legionella pneumophila, Pseudomonas, Staphylococcus aureus, Klebsiella, and other harmful microorganisms. This filter is particularly suitable for use in hospitals, nursing homes, sports facilities, residential buildings, and daycare centers, wherever the highest hygienic standards for drinking and utility water are required. Benefits of End-of-Point Water Filters for Hygiene and Operational Safety The H2Otap4000 maintains a consistently high flow rate for up to 92 days, ensuring long-term hygienic protection at the point of use. Its specialized filter housing further reduces the risk of retrograde contamination and inhibits bacterial growth within the filter. Installation is tool-free, directly at the faucet via quick-connect or threaded fitting. The filter is effective immediately, providing reliably filtered water – ideal for continuous operation without interruptions. Installing the H2Otap4000 on a tap – which adapter fits? The correct connection is essential when installing the H2Otap4000 on a tap. Depending on the existing tap, an M22 or M24 adapter may be required for installation. Before ordering, please check which thread is present at the outlet of your tap. Tap with M22 male thread If the tap has an M22 male thread, the M22 IG adapter with female thread is required. It is screwed onto the external thread of the tap and provides the appropriate connection for the H2Otap4000. Tap with M24 female thread If the tap outlet has an M24 female thread, the M24 AG adapter with male thread is required. It is screwed directly into the existing female thread of the tap. How to select the correct connection M22 male thread on the tap → M22 IG adapter with female thread M24 female thread on the tap → M24 AG adapter with male thread To determine the existing connection type, the aerator on the tap can usually be unscrewed first. You can then identify whether the tap has a male or female thread. Frequently asked questions What are terminal water filters used for? They filter out a large proportion of germs and particles from the water and can be used in emergencies, for example, in the event of a pipe network contaminated with bacteria. This ensures that consumers (taps, showers) can continue to be supplied with water. The filter serves as a preventive hygiene measure against waterborne pathogens such as Legionella pneumophila, Pseudomonas, staphylococci and Klebsiella. How often do the filters need to be replaced? The filters must be replaced after 92 days at the latest. Otherwise, there is a risk of contamination or the filter becoming clogged and losing performance. What connection options are available for the filters? Adapters are available for the filters for the common sanitary connection sizes M22 and M24. The adapters are also available in the same shop area as the filters. There is also a filter that can be used as a replacement for an existing shower head. Shower heads in particular pose a considerable health risk due to the turbulence caused by air in connection with Legionella bacteria. In which buildings are the filters used? The filters can be used in many different buildings. They can be used in private single-family or multi-family homes as well as in public buildings such as hospitals, retirement homes or larger office buildings. Frequently Asked Questions How do I find out what thread my tap has? Unscrew the aerator. You will then be able to see whether the thread is on the inside or the outside. Which adapter fits an M22 external thread? For an M22 external thread, you need the M22 IG adapter with an internal thread. Which adapter do I need for an M24 internal thread? For an M24 internal thread, the M24 external thread adapter is suitable. Do I need to unscrew the aerator before fitting? Yes, the aerator is usually removed before fitting the appropriate adapter.

H2Ower 4500 – Antibacterial Shower Water Filter for Immediate Protection Sterile filtration directly in the showerhead The H2Ower 4500 is an antibacterial end-of-point filter for showers that effectively removes harmful microorganisms from the water without altering its chemical composition. It helps prevent nosocomial infections caused by waterborne pathogens such as Legionella pneumophila, Pseudomonas, Staphylococcus aureus, Klebsiella, and other harmful microorganisms. With a consistently high flow rate for at least 92 days, the H2Ower 4500 provides immediate protection against waterborne pathogens without compromising water pressure or flow. Installation is quick and easy thanks to its standard 1/2" thread, allowing direct mounting to the shower hose without additional accessories. End-of-Point Filters for Reliable Reduction of Waterborne Pathogens The H2Ower 4500 is an antibacterial end-of-point shower filter that reliably removes harmful microorganisms at the water outlet. Sterile filtration is mechanical and does not alter the chemical composition or taste of the water. The filter serves as a preventive hygiene measure against waterborne pathogens such as Legionella pneumophila, Pseudomonas, Staphylococci, Klebsiella, and other microorganisms, which can pose a risk especially in sensitive areas. Benefits of End-of-Point Filters for Hygiene and User Safety The H2Ower 4500 provides a consistently high flow rate for at least 92 days, offering immediate protection without compromising water pressure or comfort. Installation is easy via quick-connect or standard 1/2" thread, directly on the shower hose – no additional accessories required. Thanks to its reliable filtration performance, the H2Ower 4500 is ideal for use in hospitals, care facilities, hotels, public showers, and private homes. End-of-point filters effectively support infection prevention, reduce the risk of nosocomial infections, and are an essential component of modern hygiene concepts. Frequently asked questions What are terminal water filters used for? They filter out a large proportion of germs and particles from the water and can be used in emergencies, for example, in the event of a pipe network contaminated with bacteria. This ensures that consumers (taps, showers) can continue to be supplied with water. The filter serves as a preventive hygiene measure against waterborne pathogens such as Legionella pneumophila, Pseudomonas, staphylococci and Klebsiella. How often do the filters need to be replaced? The filters must be replaced after 92 days at the latest. Otherwise, there is a risk of contamination or the filter becoming clogged and losing performance. What connection options are available for the filters? Adapters are available for the filters for the common sanitary connection sizes M22 and M24. The adapters are also available in the same shop area as the filters. There is also a filter that can be used as a replacement for an existing shower head. Shower heads in particular pose a considerable health risk due to the turbulence caused by air in connection with Legionella bacteria. In which buildings are the filters used? The filters can be used in many different buildings. They can be used in private single-family or multi-family homes as well as in public buildings such as hospitals, retirement homes or larger office buildings.

M22 female quick coupling adapter (internal thread), with water stop for the terminal water filters for taps. Adapter for taps with an internal M22 male thread on the water outlet. This adapter is suitable for taps that have a spout with an M22 external thread that is offset inwards. It serves as an extension and moves the thread to the outside so that it is easily accessible and the water filter for taps can be connected without any problems.

Quick coupling adapter M24 AG (male thread), with water stop for the terminal water filters for taps. Adapter for connecting a water filter. Adapter for taps with an M24 female thread on the water outlet. This adapter is suitable for taps that have an outlet with a 24 female thread. This means that our water filters for taps can be easily attached to the tap.