Urology

MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497) Frequently Asked Questions What is the MB A6K4 mixed-bed resin used for? It is used to produce very pure water by removing dissolved substances. How pure does the water become with this resin? It achieves a very low conductivity of around 0.06 µS/cm. What applications is the resin suitable for? Suitable for use in non-regenerable cartridges, for high-efficiency deionisation involving the removal of silicic acid, and for applications involving the production of ultrapure water. What is the resin’s composition? MB A6K4 is a high-capacity mixed-bed ion exchange resin consisting of a mixture of a strongly basic anion exchange resin and a strongly acidic cation exchange resin for direct water purification. How is the product supplied? In 25-litre bags, packed on a pallet. 1050 litres = 42 bags packed in 25-litre bags. Is the resin reusable or regenerable? No, it is intended for single use in cartridges.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 10kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards. EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 10kg sack (Art.-No. 896467) Pallet purchase: 100x 10kg sacks (Art.-No. 896498) Frequently Asked Questions What are these salt tablets used for in the system? For regenerating water softening systems Why are the salt tablets available in 10-kg packs? The smaller bags make them easier to handle, store and dose on a day-to-day basis. How should the salt tablets be stored? Store in a dry place and keep the packaging tightly sealed. How practical are they to use in day-to-day operations? The 10-kg bags are easy to transport and refill. Can I use the quantity flexibly during operation? Yes, the units allow for use according to need without any hassle. What exactly does the EN 973 A standard stand for? The EN 973 (Type A) standard is a European quality standard for sodium chloride (regeneration salt). It ensures that the salt is safe for use in drinking water treatment. Purpose: The salt regenerates ion exchangers (water softening systems) that filter calcium and magnesium from the water. Type A: Defines high-purity evaporated salt (purity ≥ 99.9% sodium chloride), which is subject to strict limits for toxic impurities and heavy metals to guarantee the safety of drinking water.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 25kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards... EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 25kg sack (Art.-No. 896468) Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500) Frequently Asked Questions Why do I need these salt tablets in the first place? Sodium chloride is used as regeneration salt in water softening systems to keep the system functioning properly. It regenerates the ion exchangers, which remove limescale-forming minerals such as calcium and magnesium from the water. This ensures that the water softening remains effective in the long term. Are the tablets suitable for my system? Yes, they comply with EN 973 Type A and are suitable for many systems. How long does a pallet last in operation? That depends on water consumption and the size of the system. Do the salt tablets leave residues in the system? No, they dissolve cleanly and leave no residue. How are the tablets delivered? On a pallet containing 40 bags of 25 kg each. Why is EN 973 Type A important? The EN 973 (Type A) standard specifies the quality requirements for sodium chloride used as regeneration salt in water softening systems. It ensures that the salt is suitable and safe for the treatment of drinking water. The salt is used to regenerate ion exchangers, which remove calcium and magnesium ions from the water. The Type A classification denotes high-purity evaporated salt with a sodium chloride content of at least 99.9%, which must meet strict specifications regarding impurities and heavy metals in order to protect drinking water quality.

MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497) Frequently Asked Questions What does ‘disposable quality’ mean in relation to this product? The resin is replaced after use and is not recycled. What applications is the resin suitable for? For ultrapure water applications with high water quality requirements. How is the product supplied? As a half-pallet in convenient 25-litre bags. 20 bags packed in 25-litre bags, totalling 500 litres. What exactly does “no VOC” mean? VOC stands for Volatile Organic Compounds. This refers to a group of organic (carbon-containing) substances that easily evaporate or become gaseous even at room temperature. In the context of mixed-bed resins, the designation (no VOC) means that the resin does not release any volatile organic substances or solvents into the purified water. How can I tell if it is being used correctly in operation? By monitoring the water quality in the respective system. Why is mixed-bed resin used in the final purification step? Mixed-bed resin (particularly VOC-free variants) is used as the final purification step (polishing) to bring the water to the highest level of purity (ultrapure water). It acts as an extremely effective ion exchanger, completely removing the very last dissolved minerals, trace substances and ions from the water.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497) Frequently Asked Questions What exactly is the MB A6K4 mixed-bed resin used for? It is used to produce ultra-pure water in demanding applications. What is the water quality like after use? Very high – the conductivity is around 0.06 µS/cm. For which systems is the resin suitable? For non-regenerable cartridges in water treatment. What makes this resin particularly effective? The combination of anion and cation resin ensures thorough purification. What does ‘no VOC’ stand for? VOC stands for “Volatile Organic Compounds” and refers to volatile organic compounds, i.e. carbon-containing substances that can easily evaporate or transition into the gas phase even at room temperature. In the context of mixed-bed resins, the designation “no VOC” means that the resin does not release such volatile organic substances or solvents into the treated water. Why is mixed-bed resin used in the final purification step? Mixed-bed resin is used in the final purification step (polishing) to treat water to a very high level of purity, right up to ultrapure water. It acts as a particularly efficient ion exchanger, reliably removing even the smallest traces of dissolved minerals, trace substances and ions from the water.

The modular water treatment system was specially developed for the outpatient care sector. While retaining the overall geometry, the system can be adapted to the different degrees of water hardness in Germany, the quantities required in different outpatient centers, as well as to the initial water quality including any treatment steps on the part of the supplier. The modularity offers the decisive advantage that the overall concept can be adapted to the respective water type or composition as well as the treatment process of the supplier. Concept Demineralized water treatment for the outpatient sector Use of demineralized water in the outpatient sector Fully demineralized water (demineralized water) plays a central role in the outpatient medical sector, particularly in the reprocessing of medical devices, in laboratory applications and in the final rinse for mechanical instrument reprocessing. The aim is to avoid residues that could be caused by minerals, salts or other substances contained in tap water. For safe use, demineralized water must meet defined quality requirements: The conductivity must be below 0.1 µS/cm. This indicates that it contains almost no dissolved salts or ions. The silicate content must not exceed 0.4 g/l to avoid silicate deposits on medical instruments that could impair functionality or lead to hygienic risks. Only if these limit values are adhered to can residue-free and gentle reprocessing be guaranteed that meets the hygiene requirements in the outpatient sector. This is particularly relevant in dental practices, dermatology, endoscopy and in outpatient operating theatres, where deionized water is used for final rinsing or for steam generators in sterilization processes, among other things. The components used are listed below: Cabinet System separator Filter system (pre-filter & activated carbon filter) Softening system Reverse osmosis system Permeate tank 100 liters (volume can be adjusted) Pressure boosting station Two-stage mixed bed UV system (optional) Pyrogen filter (optional) Ring line in front of the mixing bed if the consumers are not removed to prevent contamination Brine lifting system (optional) Testomat 808 SIO2 (silicate measurement) Conductivity measurement NeoTecMaster (optional) Performance of the system Depending on the design of the system, 90 l, 150 l, 230 l or 300 l deionized water can be produced per hour. The capacity of the permeate tank can be adjusted, but must be positioned outside the cabinet due to the larger dimensions including the pressure booster station from a capacity of > 150 l/ (depending on the application). Shut-off via system separator The installation of a system separator is mandatory to protect the drinking water network from contamination by treated water or changes to the natural composition of the drinking water fed in due to its technical treatment. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water if a fault or leakage occurs. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which is integrated in the bottom tray of the cabinet and the second is located outside at the level of the tank and the pressure booster station. Filter The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems that could be damaged by impurities in the water. Water softener The water softener removes the hardness constituents (calcium and magnesium) from the drinking water and replaces them with sodium. The function is based on an ion exchange process and ensures that the reverse osmosis membranes are reliably protected against clogging. Reverse osmosis In reverse osmosis, the natural osmotic process is reversed. The softened water is pumped through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, fours and other impurities. The installed reverse osmosis has a retention rate of approx. 98% in relation to all substances dissolved in the water. Permeate tank The built-in round tank offers advantages in terms of stability, cleaning and space requirements. The uniform shape ensures that the water is treated and stored efficiently. The optimized tank geometry prevents the potential growth of microbiological contamination and thus meets the high requirements for media purity to a greater extent. Pressure booster station The pressure booster station ensures that the connected consumers are supplied with the required operating pressure and flow rate. This enables an optimized and needs-based media supply. Mixing bed The two-stage mixing bed (connected in series) is a so-called pole mixer. Due to the special composition of the resin contained in the cartridges, all dissolved substances remaining in the water are reliably removed. The resin used is highly effective against silicates, which have a particularly negative impact on the reprocessing of medical products. The mixing bed is also the first stage of the recirculation process when using the optionally available buffer tank system. Pyrogen filter A pyrogen filter is a special type of filter used in water treatment to remove pyrogens from the water. Pyrogens are substances that can cause an immunological reaction in the body, in particular an increase in body temperature. These are usually endotoxins that are released by bacteria such as Escherichia coli (E. coli). Water disinfection by UV irradiation The development of water disinfection using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They enable the removal of legionella, microbes, bacteria, viruses and protozoa while respecting the environment. Testomat® 808 SiO2 silicate measuring device A Testomat®808 SiO2 silicate is used for permanent silicate monitoring. The Testomat®808 SiO2 is a measuring instrument that is used to determine the silicate content in water. The use of the Testomat 808®SiO2 ensures reliable compliance with the limit value for SiO2 of 0.4 mg/l recommended by the DGSV and AKI. Conductivity measurement Continuous monitoring of conductivity in the range of 0-10 μS/cm on the second mixing bed. For the reprocessing of medical devices, a conductivity of <1 µS/cm is recommended for the water used for the cleaning & disinfection and sterilization process. The conductivity measurement used continuously monitors whether the conductivity falls below this value. NeoTecMaster® 5 inch with housing Data acquisition, visualization and processing are just some of the relevant topics in the field of modern water treatment. The networking of different measuring systems and their integration into process automation is an elementary component here. The NeoTecMaster® was specially developed for this task and is a manufacturer-independent multi-parameter system. Cabinet systems Only a minimum footprint of 1.60 m x 1 m is required for installation. The module consists of 2 cabinets, each 80 cm wide and 60 cm deep. It is possible to work with double hinged doors, resulting in a room depth of 1m due to the depth of 60cm and a double hinged door with a dimension of 40cm. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Viewing window Viewing windows are installed in Rittal enclosures to provide an overview of the measurement technology. The use of viewing windows in Rittal enclosure systems has several advantages. They enable a visual inspection of the devices in the enclosure without having to open the enclosure. This facilitates the monitoring, maintenance and troubleshooting of components without compromising the integrity of the enclosure. The viewing windows are usually made of a transparent material such as glass. Notes: Viewing windows in Rittal enclosures are only available for single-leaf doors. If this option is selected, please note that the required minimum room depth increases from 100 cm to 140 cm.Abwasser Abführung über Solehebeanlage (optional) As an optional component, the treatment plant can be extended to include an integrated wastewater lifting unit, which pumps the generated and collected wastewater into the sewer system. The main wastewater volume flows here are the wastewater from the regeneration of the softening system and the concentrate from the reverse osmosis. Collecting tray The integrated drip tray is used to detect leaks and is therefore a safety device part of the cabinet systems.The optional components of the system:Viewing windowLighting Frequently Asked Questions For which facilities is the system intended? The system is designed for the outpatient care sector and is used in particular in outpatient clinics. Can I adjust the system to suit my local water conditions? Yes, it can be adapted to different water hardness levels and supply conditions. Thanks to its modular design, it can be adapted to different water hardness levels, varying demand volumes and the respective raw water quality. Different treatment stages carried out by water suppliers can also be taken into account, meaning the system can be flexibly tailored to the specific on-site conditions. What is the specific purpose of the treated water? It is used for the preparation of medical devices and hygienic rinsing processes. How is water quality monitored on an ongoing basis? Key parameters are measured continuously and monitored automatically. What role does the NeoTecMaster play in the system? It is used to display and monitor all relevant operating and water parameters. How flexible is the system when water demand increases? Its capacity and configuration can be adapted as required. What are the specific benefits of the integrated UV system? It helps to reliably reduce bacteria in the water. How is it prevented that water leaks out unnoticed? The integrated drip tray is used to detect leaks and thus acts as a safety feature.

Under-sink system– Compact Solutions for Pure Water Quality Undercounter systems are space-saving, efficient water treatment solutions designed for discreet installation beneath work surfaces. They are indispensable in sensitive environments such as medical technology, laboratory furniture, dental clinics, and the MedTec industry. These systems reliably deliver purified water – demineralized (DI) water – exactly where it's needed. Advantages of Under-sink system: Compact design for integration into furniture and workspaces Easy to incorporate into existing supply systems Reliable multi-stage water purification Hygienic dispensing options for medical applications Example from the HeylNeomeris Range: NeoPureMini – Multi-Stage Under-sink Diluat System Pre-assembled on a stable frame and ready to connect, the NeoPureMini is ideal for installation under lab benches, in dental offices, or in medical furniture modules. With multi-stage filtration (including activated carbon, fine filtration, and optional UV stage), it provides high-purity DI water for stringent hygiene requirements in the sterilization of medical instruments in outpatient centers, operating rooms, and clinics.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 10kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards. EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 10kg sack (Art.-No. 896467) Pallet purchase: 100x 10kg sacks (Art.-No. 896498) Frequently Asked Questions What are the salt tablets used for? To regenerate water softening systems whilst they are in operation. What is the quality of the salt? It consists of high-purity evaporated salt containing at least 99.9% sodium chloride. In what packaging is it supplied? In a handy 10 kg bag made of PE film. How should the product be stored? In a dry place and kept tightly sealed. Which standards does the salt meet? It complies with several EN standards for water treatment and chlorine generation. What certifications are available? ISO 9001, ISO 14001 and IFS for tested quality and safety. What applications is the product suitable for? For water softening as well as technical and hygiene-sensitive applications. What is the advantage of the 10 kg pack? It is easy to handle and ideal for smaller consumption volumes.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 25kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards... EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 25kg sack (Art.-No. 896468) Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500) Frequently Asked Questions What are the salt tablets used for? For regenerating water softening systems. What exactly is the quality of the salt? It consists of high-purity evaporated salt containing at least 99.9% sodium chloride. In what packaging is the product supplied? In 25 kg bags made of protective PE film. How should the salt be stored? In a dry place and kept tightly sealed. Which standards does the product meet? It complies with several EN standards for water treatment and chlorine generation. What certifications are available? ISO 9001, ISO 14001 and IFS for verified quality and safety. For which applications is this salt suitable? For water softeners and technical water treatment systems. What distinguishes this variant from larger containers? It is designed as a more manageable unit for more flexible use.