Clinical Solutions

MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497) Frequently Asked Questions What is the MB A6K4 mixed-bed resin used for? It is used to produce very pure water by removing dissolved substances. How pure does the water become with this resin? It achieves a very low conductivity of around 0.06 µS/cm. What applications is the resin suitable for? Suitable for use in non-regenerable cartridges, for high-efficiency deionisation involving the removal of silicic acid, and for applications involving the production of ultrapure water. What is the resin’s composition? MB A6K4 is a high-capacity mixed-bed ion exchange resin consisting of a mixture of a strongly basic anion exchange resin and a strongly acidic cation exchange resin for direct water purification. How is the product supplied? In 25-litre bags, packed on a pallet. 1050 litres = 42 bags packed in 25-litre bags. Is the resin reusable or regenerable? No, it is intended for single use in cartridges.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 10kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards. EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 10kg sack (Art.-No. 896467) Pallet purchase: 100x 10kg sacks (Art.-No. 896498) Frequently Asked Questions What are these salt tablets used for in the system? For regenerating water softening systems Why are the salt tablets available in 10-kg packs? The smaller bags make them easier to handle, store and dose on a day-to-day basis. How should the salt tablets be stored? Store in a dry place and keep the packaging tightly sealed. How practical are they to use in day-to-day operations? The 10-kg bags are easy to transport and refill. Can I use the quantity flexibly during operation? Yes, the units allow for use according to need without any hassle. What exactly does the EN 973 A standard stand for? The EN 973 (Type A) standard is a European quality standard for sodium chloride (regeneration salt). It ensures that the salt is safe for use in drinking water treatment. Purpose: The salt regenerates ion exchangers (water softening systems) that filter calcium and magnesium from the water. Type A: Defines high-purity evaporated salt (purity ≥ 99.9% sodium chloride), which is subject to strict limits for toxic impurities and heavy metals to guarantee the safety of drinking water.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 25kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards... EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 25kg sack (Art.-No. 896468) Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500) Frequently Asked Questions Why do I need these salt tablets in the first place? Sodium chloride is used as regeneration salt in water softening systems to keep the system functioning properly. It regenerates the ion exchangers, which remove limescale-forming minerals such as calcium and magnesium from the water. This ensures that the water softening remains effective in the long term. Are the tablets suitable for my system? Yes, they comply with EN 973 Type A and are suitable for many systems. How long does a pallet last in operation? That depends on water consumption and the size of the system. Do the salt tablets leave residues in the system? No, they dissolve cleanly and leave no residue. How are the tablets delivered? On a pallet containing 40 bags of 25 kg each. Why is EN 973 Type A important? The EN 973 (Type A) standard specifies the quality requirements for sodium chloride used as regeneration salt in water softening systems. It ensures that the salt is suitable and safe for the treatment of drinking water. The salt is used to regenerate ion exchangers, which remove calcium and magnesium ions from the water. The Type A classification denotes high-purity evaporated salt with a sodium chloride content of at least 99.9%, which must meet strict specifications regarding impurities and heavy metals in order to protect drinking water quality.

MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497) Frequently Asked Questions What does ‘disposable quality’ mean in relation to this product? The resin is replaced after use and is not recycled. What applications is the resin suitable for? For ultrapure water applications with high water quality requirements. How is the product supplied? As a half-pallet in convenient 25-litre bags. 20 bags packed in 25-litre bags, totalling 500 litres. What exactly does “no VOC” mean? VOC stands for Volatile Organic Compounds. This refers to a group of organic (carbon-containing) substances that easily evaporate or become gaseous even at room temperature. In the context of mixed-bed resins, the designation (no VOC) means that the resin does not release any volatile organic substances or solvents into the purified water. How can I tell if it is being used correctly in operation? By monitoring the water quality in the respective system. Why is mixed-bed resin used in the final purification step? Mixed-bed resin (particularly VOC-free variants) is used as the final purification step (polishing) to bring the water to the highest level of purity (ultrapure water). It acts as an extremely effective ion exchanger, completely removing the very last dissolved minerals, trace substances and ions from the water.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm Frequently Asked Questions Will the hose fit my existing setup? Yes, it has standard 3/4" connections and is compatible with most common systems. Can I install the hose myself or do I need help? Installation is straightforward and can usually be done without a professional. Is the hose suitable for drinking water? Yes, it can be used for drinking water applications without any problems. The pressure hose is perfect for connecting water softeners and mixed-bed cartridges to mixing valves and other fittings. Are two hoses included in the set? Yes, you receive a handy set of two. Is the hose flexible or rather rigid? It is flexible and can be laid easily in confined spaces. Is the hose durable and robust? Yes, it is made from high-quality materials and is designed for everyday use. Thanks to its robust construction and high-quality materials, it ensures a reliable and long-lasting connection, even under high pressure.

The pre-filter section is a filter unit consisting of a pre-filter with backwash and an activated carbon filter. It was developed for use in regions with poor water quality. Its main purpose is to protect downstream softening and osmosis systems that could be damaged by impurities in the water. Pre-filter with backwash: This filter mechanism removes coarse dirt particles and impurities from the water. The backwash technology allows the filter to be cleaned regularly, ensuring a long service life and constant performance. Activated carbon filter: The activated carbon filter removes chemical impurities, chlorine and unpleasant odours that are often found in drinking water. This additionally purifies the water and improves its quality. This pre-filter section efficiently protects your downstream systems by removing coarse particles, organic substances and chemicals. The pre-filter section is available in three different versions. Basic version Standard version Advanced version 882027 Advanced variant Pre-filtration consisting of an automatically operating backwash filter (backwash interval programmable), downstream activated carbon filter and pressure booster for the inlet to the pre-filtration. A pressure boost must be provided for line pressures < 3 bar in order to ensure a sufficiently high inlet pressure for the under-sink system. Frequently Asked Questions What is the Advanced pre-filter stage in the NeoPureMini designed for? Its main purpose is to protect downstream water softeners and reverse osmosis systems, which could be damaged by impurities in the water. What components are included in the Advanced version? An automatically backwashing pre-filter, an activated carbon filter and a pressure booster for the inlet. Why is a pressure booster integrated? To ensure stable operation of the under-sink system even at low mains pressure. Can the backwashing filter be cleaned automatically? Yes, the backwashing interval is programmable and takes place automatically. What water problems does the activated carbon filter solve? The activated carbon filter removes chemical contaminants, chlorine and unpleasant odours that are often found in drinking water. When is this Advanced version particularly useful? This pre-filter system efficiently protects your downstream systems by removing coarse particles, organic matter and chemicals. What is the main function of the pre-filter stage overall? It extends the service life of the entire system by providing effective protection for the main components.

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance Notice: The product is not approved for use in drinking water systems and does not hold the corresponding DVGW drinking water certification. Therefore, it must not be used in applications where drinking water approval is required. Frequently Asked Questions Why do I need UV water disinfection in the first place? It helps to reduce bacteria and germs in the water – without any chemicals or additives. What is the difference between the UV2100 and the UV4100? The UV4100 is designed for larger volumes of water, whilst the UV2100 is more suited to smaller systems or households. Can I simply install the system into my existing water pipe? In many cases, yes. The units fit standard 3/4″ and 1″ connections. Does UV treatment change the taste of my water? No. UV disinfection works without chemicals and does not alter the taste of the water. How often do I need to replace the UV lamp? Usually once a year to ensure the system works reliably. Do I also need a water filter upstream of the UV system? This is often advisable to prevent dirt particles from impairing the effectiveness of the UV disinfection. Is the system also suitable for well water? Yes, it is frequently used to hygienically treat well water.

Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting. The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water. Outstanding features: Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection. Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms. Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance. Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply. UV lamp 25W: Insert for UV2100 and TRIO UV 25W UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W Frequently Asked Questions Which devices is this UV lamp suitable for? It is compatible with the Cintropur UV2100 and UV4100 flow-through units. What are the benefits of using the UV lamp on a daily basis? It ensures reliable water disinfection around the clock. How often do I need to replace the UV lamp? Replacement once a year is recommended to maintain consistent performance. Can the lamp be operated continuously? Yes, it is designed for 24/7 continuous operation. How exactly does the UV lamp protect my water? It reduces bacteria, viruses and other microorganisms in the water. Is there anything I need to bear in mind when handling it? Yes, it should be protected from moisture and fingerprints. Are there different power options available? Yes, the lamp is available in 25W or 40W versions, depending on the system.

Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting. The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water. Outstanding features: Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection. Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms. Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance. Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply. UV lamp 25W: Insert for UV2100 and TRIO UV 25W UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W Frequently Asked Questions Which UV system is the 25W lamp specifically designed for? It is specifically designed for CINTROPUR UV2100 and TRIO UV 25W systems. How does the lamp contribute to water hygiene? It continuously reduces bacteria in the water using UV light. Is the lamp suitable for continuous operation? Yes, it is designed for 24-hour continuous operation. The UV lamp is designed to operate 24 hours a day, 7 days a week. When should I replace the UV lamp? Once a year, to ensure consistently safe disinfection. What is particularly important when handling it? Contact with moisture and fingerprints should be avoided.

Reliable and economical demineralized water treatment (demineralized water) is indispensable in sterile processing. However, processes, system status and operating costs are subject to constant change. As part of our basic on-site analysis, you will receive a well-founded and independent assessment of your existing demineralized water treatment system - directly at your location. Our consulting approach aims to identify optimization potential at an early stage and make it economically viable. Among other things, we look at Plant technology and dimensioning Equipment and feed technology Instruments used In sensitive environments such as hospitals, the quality of the demineralized water used is crucial - especially in areas such as sterile goods processing, laboratory diagnostics or medical technology. On request, we can also carry out targeted and professional water sampling at representative sampling points for a fee. Some of the water samples taken are analyzed on site using photometric measurements and then sent to an accredited laboratory. The results are documented in a clearly structured report - including an assessment and specific recommendations for optimization.

Focus on efficiency, quality and safety The supply of demineralized water (demineralized water) is of central importance in many areas of a clinic - for example in central sterilization, laboratory analysis or medical technology. At the same time, the requirements for efficiency, operational safety and hygiene are constantly increasing. Our on-site process analysis provides you with a structured evaluation of the existing demineralized water treatment - with a focus on efficiency, supply reliability and compliant implementation. Our consulting approach includes, among other things System survey and weak point analysis Recording the entire process chain - from the raw water supply to softening, desalination, filtration, storage and distribution systems. Comparison with the actual water demand Checking whether system capacities, retention times and storage volumes match the current and future usage situation. Evaluation of technical and organizational interfaces z. e.g. transfer points to medical technology, automatic rinsing cycles, instrument logistics, redundancy concepts, etc. Risk analysis with regard to microbiological and technical weak points incl. recommendations for sampling, avoidance of downtime contamination and material safety. Economic efficiency analysis Consideration of e.g. use of chemicals, personnel costs and optimization possibilities. As part of our process analysis, we work with you to determine The relevant withdrawal points in the supply system (e.g. after the demineralization plant, at points of consumption, in the return area) The correct sampling technique Possible influences on the measurement results (e.g. dead volume, stagnation, material compatibility) Requirements for microbiological and chemical-physical analysis Adapted to the medical requirements of the facility The aim of sampling is to obtain a realistic picture of the water quality in the facility and to identify potential risks at an early stage. Our independent analysis supports you in complying with regulatory requirements, strengthening internal quality assurance measures and ensuring the long-term operational safety of your demineralized water treatment. The results are documented in a clearly structured report - including an assessment and specific recommendations for optimization. Our process analysis creates transparency, identifies optimization potential and forms the basis for well-founded investment decisions or quality assurance measures. You receive clear documentation with specific recommendations for action - practical, independent and tailored to your clinic.

The reliable supply of demineralized water (demineralized water) to the AEMP is a critical factor for the flawless reprocessing of medical devices. Decision-makers in hospitals are faced with key questions: What are the requirements for water quality? Which pipe materials are suitable? How can a standard-compliant, hygienic and economical solution be planned and implemented? We support you in all project phases - from technical planning to material selection and implementation - with the following focal points: Determination of demand & load profiles: Analysis of peak consumption (e.g. washer-disinfectors, autoclaves), design of water treatment and storage solutions according to AEMP capacity. We take into account not only current but also future requirements. Requirements of current DGSV and AKI guidelines: Ensuring compliance with the required limit values for conductivity and silicates. Line design & material selection Technology concept: selection of suitable DI system technology Economic efficiency analysis: focus on life cycle costs, energy efficiency and maintenance costs. Our manufacturer-independent advice ensures that your investment functions reliably, compliantly and efficiently in the long term - in the interests of patient, operator and process safety.

The regular validation of the entire reprocessing process and its repeated implementation in the event of interventions or changes within the reprocessing process is an essential instrument for demonstrating process reliability. In the course of our work as technical experts, we verify the overall process, assist you with sustainable documentation, continuously monitor the effectiveness of the measures introduced, coordinate the involvement of all process participants and make recommendations for the involvement of authorised external accredited bodies and specialist companies.

MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497) Frequently Asked Questions What exactly is the MB A6K4 mixed-bed resin used for? It is used to produce ultra-pure water in demanding applications. What is the water quality like after use? Very high – the conductivity is around 0.06 µS/cm. For which systems is the resin suitable? For non-regenerable cartridges in water treatment. What makes this resin particularly effective? The combination of anion and cation resin ensures thorough purification. What does ‘no VOC’ stand for? VOC stands for “Volatile Organic Compounds” and refers to volatile organic compounds, i.e. carbon-containing substances that can easily evaporate or transition into the gas phase even at room temperature. In the context of mixed-bed resins, the designation “no VOC” means that the resin does not release such volatile organic substances or solvents into the treated water. Why is mixed-bed resin used in the final purification step? Mixed-bed resin is used in the final purification step (polishing) to treat water to a very high level of purity, right up to ultrapure water. It acts as a particularly efficient ion exchanger, reliably removing even the smallest traces of dissolved minerals, trace substances and ions from the water.

With an absolute filter fineness of 0.05 µm, the GR25 membrane filter element is suitable for applications where the highest purity and process safety are required. With a retention rate of 99.98%, it safely removes the finest particles and microbiological contaminants from liquids. With a standard length of 9 3/4, it is compatible with common filter housings and can be integrated into existing systems. Frequently Asked Questions What is this membrane filter element used for? For very fine water filtration in technical and industrial applications. How fine is the filtration provided by this element, specifically? The membrane filter element filters with an absolute filtration precision of 0.05 µm. This reliably removes 99.98% of the finest particles and microbiological contaminants from liquids. What does a retention rate of 99.98% mean? A retention rate of 99.98% means that almost all particles and microbiological contaminants are reliably removed from the liquid. Only a very small proportion can still pass through the filter. This ensures a very high level of purity and safety in the filtered liquid. Does the filter element fit into standard housings? It is designed for standard housings with a length of 9 3/4 inches. When should I replace the filter element? As soon as the flow rate noticeably decreases or performance drops. For which applications is this level of filtration appropriate? For processes with particularly high water quality requirements.

The GR25 membrane filter element with an absolute filter fineness of 0.1µm is suitable for applications where the highest purity and process safety are required. With a retention rate of 99.98%, it reliably removes the finest particles and microbiological contaminants from liquids. With a standard length of 9 3/4, it is compatible with common filter housings and can be integrated into existing systems. Frequently Asked Questions What is this membrane filter element typically used for? For the fine filtration of water in technical and industrial applications. How fine is the filtration provided by this element? This membrane filter element filters out particles and microbiological contaminants with an absolute filtration precision of 0.1 µm. It reliably retains 99.98% of the relevant contaminants, making it suitable for applications with particularly high purity requirements. What does a retention rate of 99.98% mean? Virtually all unwanted particles are reliably removed from the water. What role does the length of 9 3/4 inches play? It determines how well the filter element fits into standard housings. Do I need to replace the filter element regularly? Yes, replacement at regular intervals is necessary to maintain consistently high filtration performance.

The GR25 membrane filter element with an absolute filtration rating of 0.2 µm is designed for applications requiring the highest purity and process safety. It reliably removes the finest particles and microbiological contaminants from liquids with 99.98% retention. The filter element has a standard length of 9 ¾ inches and is compatible with common filter housings, allowing easy integration into existing systems. Frequently Asked Questions What is this membrane filter element used for? It is used for very fine filtration of water in sensitive applications. How finely does this element filter the water? The membrane filter element filters with an absolute filtration precision of 0.2 µm. This reliably removes 99.98% of the finest particles and microbiological contaminants from the water. What is the filter’s retention rate? It is a very high 99.98%. For which applications is the filter suitable? For areas where particularly clean water is required. What is the size of the filter element? It is 9 3/4 inches (24.765 cm) long. How do I know when the filter needs changing? When performance drops or the flow rate noticeably decreases. Why is such fine filtration important? It ensures that even the smallest contaminants are removed.

High-quality conductivity meter for conductivity monitoring Our innovative conductivity meter has been specially developed for monitoring conductivity in ultrapure water (demineralised water) and has a 4-20 mA signal output that enables easy integration into higher-level control systems.The measurements are temperature-compensated, which ensures greater accuracy. With a measuring range of 0 to 2 µS/cm, our device is particularly suitable for monitoring low conductivities, such as those typically found in mixed-bed ion exchanger cartridges. The limit value is displayed by means of 2 LEDs (green/red) on the top of the device. An acrylic glass cover ensures that the current status is immediately visible. The device has a ¾ screw thread, which can be customised for easy and safe installation. There is also the option of customisation in terms of the LEDs, including the measuring range and a private label. Our high-quality conductivity meter offers a reliable solution for conductivity monitoring in medical areas to fulfil the guidelines and recommendations of the DGSV. Our measuring device is also particularly suitable for mixed bed cartridge monitoring in the clinical environment. Standard LED configuration (1 green LED, 1 red LED): <0.5 µS/cm = green >0.5 µS/cm to <1.0 µS/cm = green/red flashing >1 µS/cm = red

Reliable Monitoring of Water Quality at Extremely Low Conductivity High-precision conductivity meter for ultrapure and process water The N-LF5R meter was developed for continuous monitoring of very low electrical conductivities in aqueous solutions. With a measuring range of 0–5 µS/cm, it delivers meaningful readings even with minimal conductivity changes. The integrated 3/4" screw-in measuring cell allows direct installation into the process flow. Its compact design and low power requirement via 9 V DC operation make the N-LF5R highly flexible. The robust IP65 housing protects the device against dust and splash water, ensuring reliable operation even under demanding conditions. Why precise conductivity measurement is particularly important in the low range Even slight deviations in conductivity can determine the quality of the final product or the safety of a system in many processes. The N-LF5R detects the smallest changes in the 0–5 µS/cm range, which can indicate contamination, material degradation, or process deviations. Benefits of the N-LF5R for monitoring ultrapure and process water The N-LF5R conductivity meter enables early detection of even minimal changes in conductivity in ultrapure and process water. This allows contamination, leaks, material leaching, or process deviations to be identified quickly before they lead to quality issues or equipment damage. The integrated screw-in measuring cell allows direct inline measurement, ensuring continuous and reliable readings without sampling. Combined with the robust IP65 housing, the device is ideal for permanent use in industrial applications where high measurement accuracy and operational reliability are critical. Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

The modular water treatment system was specially developed for the outpatient care sector. While retaining the overall geometry, the system can be adapted to the different degrees of water hardness in Germany, the quantities required in different outpatient centers, as well as to the initial water quality including any treatment steps on the part of the supplier. The modularity offers the decisive advantage that the overall concept can be adapted to the respective water type or composition as well as the treatment process of the supplier. Concept Demineralized water treatment for the outpatient sector Use of demineralized water in the outpatient sector Fully demineralized water (demineralized water) plays a central role in the outpatient medical sector, particularly in the reprocessing of medical devices, in laboratory applications and in the final rinse for mechanical instrument reprocessing. The aim is to avoid residues that could be caused by minerals, salts or other substances contained in tap water. For safe use, demineralized water must meet defined quality requirements: The conductivity must be below 0.1 µS/cm. This indicates that it contains almost no dissolved salts or ions. The silicate content must not exceed 0.4 g/l to avoid silicate deposits on medical instruments that could impair functionality or lead to hygienic risks. Only if these limit values are adhered to can residue-free and gentle reprocessing be guaranteed that meets the hygiene requirements in the outpatient sector. This is particularly relevant in dental practices, dermatology, endoscopy and in outpatient operating theatres, where deionized water is used for final rinsing or for steam generators in sterilization processes, among other things. The components used are listed below: Cabinet System separator Filter system (pre-filter & activated carbon filter) Softening system Reverse osmosis system Permeate tank 100 liters (volume can be adjusted) Pressure boosting station Two-stage mixed bed UV system (optional) Pyrogen filter (optional) Ring line in front of the mixing bed if the consumers are not removed to prevent contamination Brine lifting system (optional) Testomat 808 SIO2 (silicate measurement) Conductivity measurement NeoTecMaster (optional) Performance of the system Depending on the design of the system, 90 l, 150 l, 230 l or 300 l deionized water can be produced per hour. The capacity of the permeate tank can be adjusted, but must be positioned outside the cabinet due to the larger dimensions including the pressure booster station from a capacity of > 150 l/ (depending on the application). Shut-off via system separator The installation of a system separator is mandatory to protect the drinking water network from contamination by treated water or changes to the natural composition of the drinking water fed in due to its technical treatment. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water if a fault or leakage occurs. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which is integrated in the bottom tray of the cabinet and the second is located outside at the level of the tank and the pressure booster station. Filter The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems that could be damaged by impurities in the water. Water softener The water softener removes the hardness constituents (calcium and magnesium) from the drinking water and replaces them with sodium. The function is based on an ion exchange process and ensures that the reverse osmosis membranes are reliably protected against clogging. Reverse osmosis In reverse osmosis, the natural osmotic process is reversed. The softened water is pumped through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, fours and other impurities. The installed reverse osmosis has a retention rate of approx. 98% in relation to all substances dissolved in the water. Permeate tank The built-in round tank offers advantages in terms of stability, cleaning and space requirements. The uniform shape ensures that the water is treated and stored efficiently. The optimized tank geometry prevents the potential growth of microbiological contamination and thus meets the high requirements for media purity to a greater extent. Pressure booster station The pressure booster station ensures that the connected consumers are supplied with the required operating pressure and flow rate. This enables an optimized and needs-based media supply. Mixing bed The two-stage mixing bed (connected in series) is a so-called pole mixer. Due to the special composition of the resin contained in the cartridges, all dissolved substances remaining in the water are reliably removed. The resin used is highly effective against silicates, which have a particularly negative impact on the reprocessing of medical products. The mixing bed is also the first stage of the recirculation process when using the optionally available buffer tank system. Pyrogen filter A pyrogen filter is a special type of filter used in water treatment to remove pyrogens from the water. Pyrogens are substances that can cause an immunological reaction in the body, in particular an increase in body temperature. These are usually endotoxins that are released by bacteria such as Escherichia coli (E. coli). Water disinfection by UV irradiation The development of water disinfection using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They enable the removal of legionella, microbes, bacteria, viruses and protozoa while respecting the environment. Testomat® 808 SiO2 silicate measuring device A Testomat®808 SiO2 silicate is used for permanent silicate monitoring. The Testomat®808 SiO2 is a measuring instrument that is used to determine the silicate content in water. The use of the Testomat 808®SiO2 ensures reliable compliance with the limit value for SiO2 of 0.4 mg/l recommended by the DGSV and AKI. Conductivity measurement Continuous monitoring of conductivity in the range of 0-10 μS/cm on the second mixing bed. For the reprocessing of medical devices, a conductivity of <1 µS/cm is recommended for the water used for the cleaning & disinfection and sterilization process. The conductivity measurement used continuously monitors whether the conductivity falls below this value. NeoTecMaster® 5 inch with housing Data acquisition, visualization and processing are just some of the relevant topics in the field of modern water treatment. The networking of different measuring systems and their integration into process automation is an elementary component here. The NeoTecMaster® was specially developed for this task and is a manufacturer-independent multi-parameter system. Cabinet systems Only a minimum footprint of 1.60 m x 1 m is required for installation. The module consists of 2 cabinets, each 80 cm wide and 60 cm deep. It is possible to work with double hinged doors, resulting in a room depth of 1m due to the depth of 60cm and a double hinged door with a dimension of 40cm. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Viewing window Viewing windows are installed in Rittal enclosures to provide an overview of the measurement technology. The use of viewing windows in Rittal enclosure systems has several advantages. They enable a visual inspection of the devices in the enclosure without having to open the enclosure. This facilitates the monitoring, maintenance and troubleshooting of components without compromising the integrity of the enclosure. The viewing windows are usually made of a transparent material such as glass. Notes: Viewing windows in Rittal enclosures are only available for single-leaf doors. If this option is selected, please note that the required minimum room depth increases from 100 cm to 140 cm.Abwasser Abführung über Solehebeanlage (optional) As an optional component, the treatment plant can be extended to include an integrated wastewater lifting unit, which pumps the generated and collected wastewater into the sewer system. The main wastewater volume flows here are the wastewater from the regeneration of the softening system and the concentrate from the reverse osmosis. Collecting tray The integrated drip tray is used to detect leaks and is therefore a safety device part of the cabinet systems.The optional components of the system:Viewing windowLighting Frequently Asked Questions For which facilities is the system intended? The system is designed for the outpatient care sector and is used in particular in outpatient clinics. Can I adjust the system to suit my local water conditions? Yes, it can be adapted to different water hardness levels and supply conditions. Thanks to its modular design, it can be adapted to different water hardness levels, varying demand volumes and the respective raw water quality. Different treatment stages carried out by water suppliers can also be taken into account, meaning the system can be flexibly tailored to the specific on-site conditions. What is the specific purpose of the treated water? It is used for the preparation of medical devices and hygienic rinsing processes. How is water quality monitored on an ongoing basis? Key parameters are measured continuously and monitored automatically. What role does the NeoTecMaster play in the system? It is used to display and monitor all relevant operating and water parameters. How flexible is the system when water demand increases? Its capacity and configuration can be adapted as required. What are the specific benefits of the integrated UV system? It helps to reliably reduce bacteria in the water. How is it prevented that water leaks out unnoticed? The integrated drip tray is used to detect leaks and thus acts as a safety feature.

The modular water treatment system was specially developed for the outpatient care sector. While retaining the overall geometry, the system can be adapted to the different degrees of water hardness in Germany, the quantities required in different outpatient centers, as well as to the initial water quality including any treatment steps on the part of the supplier. The modularity offers the decisive advantage that the overall concept can be adapted to the respective water type or composition as well as the treatment process of the supplier. Concept Demineralized water treatment for the outpatient sector Use of demineralized water in the outpatient sector Fully demineralized water (demineralized water) plays a central role in the outpatient medical sector, particularly in the reprocessing of medical devices, in laboratory applications and in the final rinse for mechanical instrument reprocessing. The aim is to avoid residues that could be caused by minerals, salts or other substances contained in tap water. For safe use, demineralized water must meet defined quality requirements: The conductivity must be below 0.1 µS/cm. This indicates that it contains almost no dissolved salts or ions. The silicate content must not exceed 0.4 g/l to avoid silicate deposits on medical instruments that could impair functionality or lead to hygienic risks. Only if these limit values are adhered to can residue-free and gentle reprocessing be guaranteed that meets the hygiene requirements in the outpatient sector. This is particularly relevant in dental practices, dermatology, endoscopy and in outpatient operating theatres, where deionized water is used for final rinsing or for steam generators in sterilization processes, among other things. The components used are listed below: Cabinet System separator Filter system (pre-filter & activated carbon filter) Softening system Reverse osmosis system Permeate tank 100 liters (volume can be adjusted) Pressure boosting station Two-stage mixed bed UV system (optional) Pyrogen filter (optional) Ring line in front of the mixing bed if the consumers are not removed to prevent contamination Brine lifting system (optional) Testomat 808 SIO2 (silicate measurement) Conductivity measurement NeoTecMaster (optional) Performance of the system Depending on the design of the system, 90 l, 150 l, 230 l or 300 l deionized water can be produced per hour. The capacity of the permeate tank can be adjusted, but must be positioned outside the cabinet due to the larger dimensions including the pressure booster station from a capacity of > 150 l/ (depending on the application). Shut-off via system separator The installation of a system separator is mandatory to protect the drinking water network from contamination by treated water or changes to the natural composition of the drinking water fed in due to its technical treatment. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water if a fault or leakage occurs. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which is integrated in the bottom tray of the cabinet and the second is located outside at the level of the tank and the pressure booster station. Filter The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems that could be damaged by impurities in the water. Water softener The water softener removes the hardness constituents (calcium and magnesium) from the drinking water and replaces them with sodium. The function is based on an ion exchange process and ensures that the reverse osmosis membranes are reliably protected against clogging. Reverse osmosis In reverse osmosis, the natural osmotic process is reversed. The softened water is pumped through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, fours and other impurities. The installed reverse osmosis has a retention rate of approx. 98% in relation to all substances dissolved in the water. Permeate tank The built-in round tank offers advantages in terms of stability, cleaning and space requirements. The uniform shape ensures that the water is treated and stored efficiently. The optimized tank geometry prevents the potential growth of microbiological contamination and thus meets the high requirements for media purity to a greater extent. Pressure booster station The pressure booster station ensures that the connected consumers are supplied with the required operating pressure and flow rate. This enables an optimized and needs-based media supply. Mixing bed The two-stage mixing bed (connected in series) is a so-called pole mixer. Due to the special composition of the resin contained in the cartridges, all dissolved substances remaining in the water are reliably removed. The resin used is highly effective against silicates, which have a particularly negative impact on the reprocessing of medical products. The mixing bed is also the first stage of the recirculation process when using the optionally available buffer tank system. Pyrogen filter A pyrogen filter is a special type of filter used in water treatment to remove pyrogens from the water. Pyrogens are substances that can cause an immunological reaction in the body, in particular an increase in body temperature. These are usually endotoxins that are released by bacteria such as Escherichia coli (E. coli). Water disinfection by UV irradiation The development of water disinfection using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They enable the removal of legionella, microbes, bacteria, viruses and protozoa while respecting the environment. Testomat® 808 SiO2 silicate measuring device A Testomat®808 SiO2 silicate is used for permanent silicate monitoring. The Testomat®808 SiO2 is a measuring instrument that is used to determine the silicate content in water. The use of the Testomat 808®SiO2 ensures reliable compliance with the limit value for SiO2 of 0.4 mg/l recommended by the DGSV and AKI. Conductivity measurement Continuous monitoring of conductivity in the range of 0-10 μS/cm on the second mixing bed. For the reprocessing of medical devices, a conductivity of <1 µS/cm is recommended for the water used for the cleaning & disinfection and sterilization process. The conductivity measurement used continuously monitors whether the conductivity falls below this value. NeoTecMaster® 5 inch with housing Data acquisition, visualization and processing are just some of the relevant topics in the field of modern water treatment. The networking of different measuring systems and their integration into process automation is an elementary component here. The NeoTecMaster® was specially developed for this task and is a manufacturer-independent multi-parameter system. Cabinet systems Only a minimum footprint of 1.60 m x 1 m is required for installation. The module consists of 2 cabinets, each 80 cm wide and 60 cm deep. It is possible to work with double hinged doors, resulting in a room depth of 1m due to the depth of 60cm and a double hinged door with a dimension of 40cm. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Viewing window Viewing windows are installed in Rittal enclosures to provide an overview of the measurement technology. The use of viewing windows in Rittal enclosure systems has several advantages. They enable a visual inspection of the devices in the enclosure without having to open the enclosure. This facilitates the monitoring, maintenance and troubleshooting of components without compromising the integrity of the enclosure. The viewing windows are usually made of a transparent material such as glass. Notes: Viewing windows in Rittal enclosures are only available for single-leaf doors. If this option is selected, please note that the required minimum room depth increases from 100 cm to 140 cm.Abwasser Abführung über Solehebeanlage (optional) As an optional component, the treatment plant can be extended to include an integrated wastewater lifting unit, which pumps the generated and collected wastewater into the sewer system. The main wastewater volume flows here are the wastewater from the regeneration of the softening system and the concentrate from the reverse osmosis. Collecting tray The integrated drip tray is used to detect leaks and is therefore a safety device part of the cabinet systems.The optional components of the system:Viewing windowLighting Frequently Asked Questions Is the system suitable for my practice or clinic? Yes, it has been specifically developed for outpatient facilities such as ophthalmology practices, surgical centres, etc. Can the system be adapted to my water quality? Yes, the system can be flexibly adapted to different water parameters and requirements. How clean is the water after treatment? After treatment, the water is classified as fully demineralised water (DE water) and thus meets very strict quality requirements for the outpatient medical sector. In concrete terms, this means: the conductivity is below 0.1 µS/cm, meaning that the water contains virtually no dissolved salts or ions. In addition, the silicate content must not exceed 0.4 g/l to reliably prevent deposits on medical instruments. Thanks to this high purity, the water is residue-free and gentle on materials, making it particularly suitable for the reprocessing of medical devices, laboratory applications and the final rinse during automated instrument reprocessing. This water quality is crucial for hygienically safe processes, particularly in sectors such as dental practices, dermatology, endoscopy and outpatient surgical centres. How much water can the system supply per hour? Depending on the model, it produces between 90 and 300 litres of deionised water per hour. Does the system protect against germs and contaminants? Yes, several stages, such as filters and UV purification, ensure very high water quality. Do I need a lot of space for installation? No, the system requires only a compact footprint and fits into many utility rooms. How do I keep an eye on the water quality? Measuring systems monitor the values automatically and display them clearly. Can I expand or adapt the system later? Yes, thanks to its modular design, the system can be adapted to new requirements at any time. Does the system support me in day-to-day operation? Yes, it operates largely automatically and relieves you of many manual tasks.